Mondraker
Menú
Colores:
Tallas:
S M ML L XL
Mullet
170mm
165mm
Avinox M2S
800 Wh
Carbon
  • Rear shock · Fox Float X Factory Kashima Evol
  • Fork · Fox 38 29 Float GRIP X2 Factory Kashima, 170mm
  • Brakes · Sram Maven Ultimate · Sram Maven Base
  • Rear derailleur · Sram S1000 Eagle AXS, T-Type, 12s
  • Motor · Avinox M2S Drive Unit

The new Mondraker ZENDIT drops April 9.

Available exclusively through selected Mondraker USA dealers starting April 30.

Announcing the all-new ZENDIT, 

the flagship Mondraker e-MTB that boasts a new level of performance, achieved from the latest frame design and ZERO suspension kinematics, with seamless integration of the powerful new Avinox M2S drive system.

Designed for aggressive riding on the nastiest climbs and descents, ZENDIT is the result of over 11 years of e-MTB development, combined with the no-holds-barred approach to suspension performance from the Mondraker Factory Racing development team.

Zendit was created for those who see the mountains as a challenge, as a place to push the boundaries. A bike with character, energy, and an almost instant response to every challenge. When the slope steepens, the ride gets faster and the terrain becomes unpredictable, everything falls into place. Zendit unleashes its full potential.


Feel the freedom of seamless power and unrivalled performance. Lean into every ride with the confidence and determination of being in total control, even in the most demanding situations.

ZENDIT is constructed from the ground up around the latest Avinox M2S drive system.
ZENDIT is constructed from the ground up around the latest Avinox M2S drive system.

With 165mm of rear wheel travel, a mixed wheel configuration as standard and the next evolution of the ZERO suspension platform, ZENDIT is by far the most capable Mondraker bike to date.


Up. Over. Along. Down. 

It doesn’t matter. 

STEALTH AIR CARBON THE NEXT EVOLUTION

Rather than adapting an existing platform, the ZENDIT frame was designed to house the most advanced motor system on the market.

This frame is highly advanced in both design and manufacture. For the first time 6-Axis CNC machines are used for frame drilling and finishing in place of hand finished frames.

NEW SEALED BEARINGS

ZENDIT takes advantage of everything learnt from the MFR DH development team and uses the same pivot system as the new and proven Summum DH frame.

With single-size Enduro Max bearings throughout, maintenance becomes easier and two additional rubber seals help the bearings last longer.

This is not just an e-MTB to winch to the top of the mountain - ZENDIT can claw its way up the steepest and most technical climbs out there.


Why save all the fun for the descent? You no longer have to wonder what’s possible. 

SUSPENSION KINEMATICS

The ZERO suspension kinematics are completely revised to reflect what the Avinox M2S motor can output. There is more support and a more active suspension action to make sure the increased power gets to the trail.


A 36-tooth chainring further enhances drivetrain durability, whilst optimised Anti-Squat figures maintain a balanced, efficient ride with every pedal stroke.


Mondraker and Fox have worked closely to offer the best performance for ZENDIT in terms of rear suspension. The latest Fox Float X shocks on the RR and RR S models as well as the latest Fox Float X2 shock on the XR model have a specific tunning adapted to the kinematics of the bike, maximizing its performance and ride feel.

KINEMATICS IN NUMBERS

El “leverage ratio” de la ZENDIT tiene una progresividad de 27% con un amortiguador trasero de 205 x 65 mm. Ideal para la nueva generación de amortiguadores de aire de mayor volumen.

El “anti-squat” de la ZENDIT en el sag es de 105% aproximadamente, ideal para aplicaciones en bicis de mayor recorrido.

El “anti-rise” de la ZENDIT en el sag es de 99% aproximadamente. Esto mantiene la máxima tracción de la rueda trasera al frenar y la fuerza de frenado tiene un efecto mínimo sobre la suspensión.

PROPORTION MATTERS

As with other bikes over 150mm of rear wheel travel, ZENDIT comes stock with a mixed wheel configuration - it’s the best overall performance for the aggressive riding. But it can easily rock 29’’ wheels for even more climbing capability!


ZENDIT features proportional chainstay lengths depending on the sizes. S; M and M/L sizes offer the same 450mm chainstay length, whereas the L and XL models are 5mm longer at 455mm. By slightly adjusting pivot placement in all sizes, the same leverage ratio is achieved throughout. So, no matter what size you need, you get the same ride qualities.

To use 29’’ wheels, there is a lower flip-chip that increases chainstay length by 7mm, but crucially does not have any effect on the suspension kinematics. Bottom Bracket height and key angles remain the same too.


How cool is that?

At the heart of ZENDIT is the brand new M2S motor

The highest performance motor, matched perfectly to the highest performance frame.

Geometría

Chainstay: Standard
mm / inch
 
Frame size
S M M/L L XL S M M/L L XL S M M/L L XL
A Longitud tubo sillín 380mm 14.96" 410mm 16.14" 435mm 17.13" 460mm 18.11" 490mm 19.29" 380mm 14.96" 410mm 16.14" 435mm 17.13" 460mm 18.11" 490mm 19.29" 380mm 14.96" 410mm 16.14" 435mm 17.13" 460mm 18.11" 490mm 19.29"
B Longitud tubo superior 586mm 23.07" 606mm 23.86" 628mm 24.72" 650mm 25.59" 672mm 26.46" 586mm 23.07" 606mm 23.86" 628mm 24.72" 650mm 25.59" 672mm 26.46" 586mm 23.07" 606mm 23.86" 628mm 24.72" 650mm 25.59" 672mm 26.46"
C Caída eje pedalier 6mm 0.24" 6mm 0.24" 6mm 0.24" 6mm 0.24" 6mm 0.24" 11mm 0.43" 11mm 0.43" 11mm 0.43" 11mm 0.43" 11mm 0.43" 6mm 0.24" 6mm 0.24" 6mm 0.24" 6mm 0.24" 6mm 0.24"
D Altura eje pedalier 345mm 13.58" 345mm 13.58" 345mm 13.58" 345mm 13.58" 345mm 13.58" 340mm 13.39" 340mm 13.39" 345mm 13.58" 345mm 13.58" 345mm 13.58" 345mm 13.58" 345mm 13.58" 345mm 13.58" 345mm 13.58" 345mm 13.58"
E Longitud vainas 450mm 17.72" 450mm 17.72" 450mm 17.72" 455mm 17.91" 455mm 17.91" 451mm 17.76" 451mm 17.76" 451mm 17.76" 456mm 17.95" 456mm 17.95" 450mm 17.72" 450mm 17.72" 450mm 17.72" 455mm 17.91" 455mm 17.91"
F Ángulo tubo sillín real 73.5° 73.5° 73.5° 73.5° 73.5° 73.15° 73.15° 73.15° 73.15° 73.15° 73.5° 73.5° 73.5° 73.5° 73.5°
G Ángulo tubo sillín efectivo 77° 77° 77° 77° 77° 76.65° 76.65° 76.65° 76.65° 76.65° 77° 77° 77° 77° 77°
H Ángulo dirección 63.5° 63.5° 63.5° 63.5° 63.5° 63.15° 63.15° 63.15° 63.15° 63.15° 63.5° 63.5° 63.5° 63.5° 63.5°
I Fork Offset 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73"
J Distancia entre ejes 1241mm 48.86" 1261mm 49.65" 1286mm 50.63" 1315mm 51.77" 1339mm 52.72" 1242mm 48.90" 1262mm 49.69" 1287mm 50.67" 1316mm 51.81" 1340mm 52.76" 1241mm 48.86" 1261mm 49.65" 1286mm 50.63" 1315mm 51.77" 1339mm 52.72"
K Longitud pipa 110mm 4.33" 110mm 4.33" 120mm 4.72" 130mm 5.12" 140mm 5.51" 110mm 4.33" 110mm 4.33" 120mm 4.72" 130mm 5.12" 140mm 5.51" 110mm 4.33" 110mm 4.33" 120mm 4.72" 130mm 5.12" 140mm 5.51"
L Reach 440mm 17.32" 460mm 18.11" 480mm 18.90" 500mm 19.69" 520mm 20.47" 436mm 17.17" 456mm 17.95" 476mm 18.74" 496mm 19.53" 516mm 20.31" 440mm 17.32" 460mm 18.11" 480mm 18.90" 500mm 19.69" 520mm 20.47"
M Stack 631mm 24.84" 631mm 24.84" 640mm 25.20" 649mm 25.55" 658mm 25.91" 633mm 24.92" 634mm 24.96" 643mm 25.31" 652mm 25.67" 661mm 26.02" 631mm 24.84" 631mm 24.84" 640mm 25.20" 649mm 25.55" 658mm 25.91"

Componentes

Especificaciones Técnicas

  • cuadro

    Cuadro

    Zendit Stealth Air full Carbon, Updated Zero Suspension System, 165 mm de recorrido, Forward Geometry, batería interna, eje trasero Boost de 12 x 148 mm, UDH, tubo de dirección conificado, bieleta superior Monoblock, sistema de cableado interno HHG, rodamientos sellados MAX, ejes sobredimensionados de 15 mm, protectores exclusivos de plástico para el motor

    tallas

    Tallas

    S: 380 mm / M: 410 mm / ML: 435 mm / L: 460 mm / XL: 490 mm

  • amortiguador

    Amortiguador

    Fox Float X Factory Kashima Evol LV 205 x 65 mm. Palanca de ajuste de la compresión con dos posiciones (Abierto/Cerrado), compresión en baja velocidad, rebote en baja velocidad, precarga de aire. Montaje superior Trunnion, casquillos inferiores de 30 x 8 mm

    ajuste del amortiguador

    Ajuste del amortiguador

    Compresión CS30, Bleed 1,1, rebote RL50, Rezi B40, LML, MCU estándar, 0 espaciadores de volumen

  • horquilla

    Horquilla

    Fox 38 29 Float GRIP X2 Factory Kashima, 170 mm, tubo de dirección conificado, eje Kabolt Boost de 15 x 110 mm, offset de 44mm. Ajustes: compresión en alta y baja velocidad, rebote en alta y baja velocidad, precarga de aire

    dirección

    Dirección

    Acros custom ZS56/ZS56, 1-1/8", tubo de dirección de 1,5”, sistema de cableado interno, tapones de sellado, sin sistema BlockLock

  • potencia

    Potencia

    ONOFF S9 30 mm 0º, CNC completo, diámetro de 31,8 mm

    manillar

    Manillar

    ONOFF S6 1.0, aluminio 7050, rise de 25 mm, anchura de 800 mm, backsweep de 8º, upsweep de 5º, diámetro de 31,8 mm. Talla L y XL: rise de 38 mm

  • puños

    Puños

    ONOFF Desert Pro, lock-on CNC, 135 mm. L y XL: mayor grosor

    tija

    Tija

    ONOFF Pija de cableado interno, diámetro de 31,6 mm, 1 mando remoto con rodamiento, talla S: 140-115 mm (388-235 mm), talla M: 160-135 mm (428-255 mm), talla ML: 180-155 mm (468-275 mm), talla L: 210-185 mm (528-305 mm), talla XL: 210-185 mm (528-305 mm)

  • sillin

    Sillin

    Ergon SM10 E-Mountain, black

    freno delantero

    Freno delantero

    Sram Maven Base, pinza de 4 pistones de 18 milímetros, disco Centerline de 200 mm (una sola pieza, montaje IS de 6 tornillos), pastillas orgánicas con soporte de acero

  • freno trasero

    Freno trasero

    Sram Maven Base, pinza de 4 pistones de 18 milímetros, disco Centerline de 200 mm (una sola pieza, montaje IS de 6 tornillos), pastillas orgánicas con soporte de acero

    manetas de freno

    Manetas de freno

    Sram Maven Base, DirectLink y eje de maneta con casquillos, ajuste de posición sin herramientas

  • llantas

    Llantas

    DT Swiss Hybrid H 1900 SPLINE, aluminio, hooked, crotchet tubeless TC, ancho interno de 30 mm, tubeless ready, 28 radios

    radios

    Radios

    Radios rectos DT Swiss, DT Swiss Hybrid I, black

  • buje delantero

    Buje delantero

    DT Swiss 370, Boost 15 x 110 mm, IS de 6 tornillos

    buje trasero

    Buje trasero

    DT Swiss 370 con sistema Ratchet LN System 18T, Boost 12 x 148 mm, IS de 6 tornillos, núcleo HG

  • neumático delantero

    Neumático delantero

    Maxxis Assegai 29 x 2,5 WT; tubeless ready, compuesto 3C Maxx Grip, EXO+ protection, 60 TPI, aro plegable

    neumático trasero

    Neumático trasero

    Maxxis Minion DHR II 27,5 x 2,5 WT; tubeless ready, compuesto 3C MaxxTerra, DD protection, 120 x 2 TPI, aro plegable

  • bielas

    Bielas

    e*thirteen Helix Race e*Spec aluminio. Todas las tallas: 155 mm

    platos

    Platos

    Sram Eagle 36T T-Type, 104BCD, acero, CL 55

  • cadena

    Cadena

    Sram GX Eagle T-Type, 12v Flattop, PowerLock

    cambio - trasero

    Cambio - trasero

    Sram S1000 Eagle AXS, T-Type, 12v

  • mandos - pulsadores de cambio

    Mandos - pulsadores de cambio

    Sram Eagle AXS Pod Controller con abrazadera independiente, 12v

    piñones

    Piñones

    Sram XS-1270, 10-52T, T-Type, 12v

  • otros

    Otros

    Cable de extensión Sram AXS

    display

    Display

    Pantalla Avinox DP100 / Mandos inalámbricos Avinox BC100 izquierdo y derecho

  • motor

    Motor

    Avinox M2S

    bateria

    Bateria

    Batería Avinox 800 Wh / Cargador Avinox 4A

Limited allocation. High demand.

Reserve yours now:

Localiza tu tienda

Encuentra tu tienda más cercana

Go to top of page