Mondraker
Menù
ZENDIT RR
ZENDIT RR
ZENDIT RR
Biciclette ZENDIT RR S ZENDIT XR
Colori:
Taglie:
S M M/L L XL
Mullet
170mm
165mm
Avinox
800 Wh
Carbon
  • Ammortizzatore ·
  • Forcella ·
  • Freno anteriore ·
  • Cambio - Posteriore ·
  • Motore ·
Confronta la bicicletta
Guida alle taglie
ZENDIT RR

ZENDIT RR

ENDURO

Biciclette ZENDIT RR S ZENDIT XR
Informazioni Componenti Geometria Galleria Download
$10,699
TROVA RIVENDITORE

The new Mondraker ZENDIT drops April 9.

Available exclusively through selected Mondraker USA dealers starting April 30.

Announcing the all-new ZENDIT, 

the flagship Mondraker e-MTB that boasts a new level of performance, achieved from the latest frame design and ZERO suspension kinematics, with seamless integration of the powerful new Avinox drive system.
Guarda il video

Designed for aggressive riding on the nastiest climbs and descents, ZENDIT is the result of over 11 years of e-MTB development, combined with the no-holds-barred approach to suspension performance from the Mondraker Factory Racing development team.

Zendit was created for those who see the mountains as a challenge, as a place to push the boundaries. A bike with character, energy, and an almost instant response to every challenge. When the slope steepens, the ride gets faster and the terrain becomes unpredictable, everything falls into place. Zendit unleashes its full potential.


Feel the freedom of seamless power and unrivalled performance. Lean into every ride with the confidence and determination of being in total control, even in the most demanding situations.

ZENDIT is constructed from the ground up around the latest Avinox drive system.
ZENDIT is constructed from the ground up around the latest Avinox drive system.

With 165mm of rear wheel travel, a mixed wheel configuration as standard and the next evolution of the ZERO suspension platform, ZENDIT is by far the most capable Mondraker bike to date.


Up. Over. Along. Down. 

It doesn’t matter. 

STEALTH AIR CARBON THE NEXT EVOLUTION

Rather than adapting an existing platform, the ZENDIT frame was designed to house the most advanced motor system on the market.

This frame is highly advanced in both design and manufacture. For the first time 6-Axis CNC machines are used for frame drilling and finishing in place of hand finished frames.

NEW SEALED BEARINGS

ZENDIT takes advantage of everything learnt from the MFR DH development team and uses the same pivot system as the new and proven Summum DH frame.

With single-size Enduro Max bearings throughout, maintenance becomes easier and two additional rubber seals help the bearings last longer.

This is not just an e-MTB to winch to the top of the mountain - ZENDIT can claw its way up the steepest and most technical climbs out there.


Why save all the fun for the descent? You no longer have to wonder what’s possible. 

SUSPENSION KINEMATICS

The ZERO suspension kinematics are completely revised to reflect what the Avinox motor can output. There is more support and a more active suspension action to make sure the increased power gets to the trail.


A 36-tooth chainring further enhances drivetrain durability, whilst optimised Anti-Squat figures maintain a balanced, efficient ride with every pedal stroke.


Mondraker and Fox have worked closely to offer the best performance for ZENDIT in terms of rear suspension. The latest Fox Float X shocks on the RR and RR S models as well as the latest Fox Float X2 shock on the XR model have a specific tunning adapted to the kinematics of the bike, maximizing its performance and ride feel.

KINEMATICS IN NUMBERS

ZENDIT leverage ratio mostra una progressione del 27% con ammortizzatore posteriore 205x65 mm, ideale per la nuova generazione di ammortizzatori ad aria ad alto volume.

ZENDIT anti-squat al SAG è circa del 105%, ideale per una piattaforma con escursione lunga.

ZENDIT anti-rise al SAG è circa del 99%. Questo mantiene la massima trazione della ruota posteriore in frenata e riduce al minimo l’influenza della frenata sulla sospensione.

PROPORTION MATTERS

As with other bikes over 150mm of rear wheel travel, ZENDIT comes stock with a mixed wheel configuration - it’s the best overall performance for the aggressive riding. But it can easily rock 29’’ wheels for even more climbing capability!


ZENDIT features proportional chainstay lengths depending on the sizes. S; M and M/L sizes offer the same 450mm chainstay length, whereas the L and XL models are 5mm longer at 455mm. By slightly adjusting pivot placement in all sizes, the same leverage ratio is achieved throughout. So, no matter what size you need, you get the same ride qualities.

To use 29’’ wheels, there is a lower flip-chip that increases chainstay length by 7mm, but crucially does not have any effect on the suspension kinematics. Bottom Bracket height and key angles remain the same too.


How cool is that?

Geometria

Chainstay: Standard
mm / inch
 
Dimensione del telaio
S M M/L L XL S M M/L L XL
A Lunghezza Piantone 380mm 14.96" 410mm 16.14" 435mm 17.13" 460mm 18.11" 490mm 19.29" 380mm 14.96" 410mm 16.14" 435mm 17.13" 460mm 18.11" 490mm 19.29"
B Lunghezza Tubo Orizz. Virtuale 586mm 23.07" 606mm 23.86" 628mm 24.72" 650mm 25.59" 672mm 26.46" 586mm 23.07" 606mm 23.86" 628mm 24.72" 650mm 25.59" 672mm 26.46"
C BB Drop 6mm 0.24" 6mm 0.24" 6mm 0.24" 6mm 0.24" 6mm 0.24" 11mm 0.43" 11mm 0.43" 11mm 0.43" 11mm 0.43" 11mm 0.43"
D Altezza movimento centrale 345mm 13.58" 345mm 13.58" 345mm 13.58" 345mm 13.58" 345mm 13.58" 340mm 13.39" 340mm 13.39" 345mm 13.58" 345mm 13.58" 345mm 13.58"
E Lunghezza Batticatena 450mm 17.72" 450mm 17.72" 450mm 17.72" 455mm 17.91" 455mm 17.91" 451mm 17.76" 451mm 17.76" 451mm 17.76" 456mm 17.95" 456mm 17.95"
F Angolo tubo sella 73.5° 73.5° 73.5° 73.5° 73.5° 73.15° 73.15° 73.15° 73.15° 73.15°
G Angolo Sella 77° 77° 77° 77° 77° 76.65° 76.65° 76.65° 76.65° 76.65°
H Angolo Sterzo 63.5° 63.5° 63.5° 63.5° 63.5° 63.15° 63.15° 63.15° 63.15° 63.15°
I Offset Forcella / Rake 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73" 44mm 1.73"
J Interasse 1241mm 48.86" 1261mm 49.65" 1286mm 50.63" 1315mm 51.77" 1339mm 52.72" 1242mm 48.90" 1262mm 49.69" 1287mm 50.67" 1316mm 51.81" 1340mm 52.76"
K Lunghezza Tubo Sterzo 110mm 4.33" 110mm 4.33" 120mm 4.72" 130mm 5.12" 140mm 5.51" 110mm 4.33" 110mm 4.33" 120mm 4.72" 130mm 5.12" 140mm 5.51"
L Reach 440mm 17.32" 460mm 18.11" 480mm 18.90" 500mm 19.69" 520mm 20.47" 436mm 17.17" 456mm 17.95" 476mm 18.74" 496mm 19.53" 516mm 20.31"
M Stack 631mm 24.84" 631mm 24.84" 640mm 25.20" 649mm 25.55" 658mm 25.91" 633mm 24.92" 634mm 24.96" 643mm 25.31" 652mm 25.67" 661mm 26.02"
N Stem Length null null null null null null null null null null
O Fork Height null null null null null null null null null null
Leggi di più Leggi di meno
Material de descarga
Pezzi di ricambio Configurazione delle sospensioni Manuale
  1. Mullet
  2. ZERO SUSPENSION SYSTEM
  3. FORWARD GEOMETRY
  4. STEALTH CARBON

Componenti

Specifiche tecniche

  • Telaio

    Telaio

    Zendit Stealth Air full Carbon, Updated Zero Suspension System, 165mm travel, Forward Geometry, internal battery, Boost 12x148mm rear axle, UDH, tapered head tube, one-piece Monoblock upper link, HHG internal cable routing, MAX capacity sealed bearings, oversize 15mm axles, exclusive plastic motor covers.

    Taglie

    Taglie

    S: 380mm / M: 410mm / ML: 435mm / L: 460mm / XL: 490mm

  • Ammortizzatore

    Ammortizzatore

    Fox Float X Factory Kashima Evol LV 205x65mm. 2-positions lever compresion (Open/Firm), low-speed compression, low-speed rebound, air preload. Trunnion top mount, 30x8mm bottom bushings.

    Regolazione ammortizzatore

    Regolazione ammortizzatore

    CS 30 compression, 1,1 Bleed, RL50 rebound, Rezi B40, LML, standard MCU, 0 volume spacers

  • Forcella

    Forcella

    Fox 38 29 Float GRIP X2 Factory Kashima, 170mm, tapered steerer tube, Boost 15x110mm Kabolt axle, 44mm offset. High and low-speed compression, high and low-speed rebound, air preload.

    Sterzo

    Sterzo

    Acros custom ZS56/ZS56, 1-1/8", 1.5" head tube, Internal cable routing, sealing plugs, without blocklock.

  • Attacco manubrio

    Attacco manubrio

    Onoff S9 30mm 0º, Full CNC, 31.8mm barbore.

    Manubrio

    Manubrio

    Onoff S9 1.0 Carbon, rise: 25mm, width: 800mm, 8º backsweep, 5º upsweep, 31.8mm barbore. L and XL size: 38mm rise.

  • Manopole

    Manopole

    Onoff Desert Pro, CNC lock-on, 135mm. L and XL: Thicker size.

    Reggisella

    Reggisella

    Onoff Pija dropper internal, diameter 31.6mm, 1X Remote lever with bearing, S size: 140-115mm (388-235mm), M size: 160-135mm (428-255mm), ML size: 180-155mm (468-275mm), L size: 210-185mm (528-305mm), XL size: 210-185mm (528-305mm).

  • Sella

    Sella

    Ergon SM10 E-Mountain Black.

    Freno anteriore

    Freno anteriore

    Sram Maven Base, 18-millimeter 4 piston caliper, Centerline 200mm IS 6 bolts one-piece rotor, steel-backed organic pads.

  • Freno posteriore

    Freno posteriore

    Sram Maven Base, 18-millimeter 4 piston caliper, Centerline 200mm IS 6 bolts one-piece rotor, steel-backed organic pads.

    Leve Freno

    Leve Freno

    Sram Maven Base stealth lever architecture, tools-free reach adjust

  • Cerchi

    Cerchi

    DT Swiss Hybrid H 1900 SPLINE, aluminum, hooked / crotchet tubeless TC, 30mm internal width, tubeless ready, 28 spokes.

    Raggi

    Raggi

    DT Hybrid I Straightpull, w/DT ProLock Squorx ProHead aluminum nipples, Three-cross (1:1) pattern.

  • Asse mozzo anteriore

    Asse mozzo anteriore

    DT Swiss 370, 15x110mm Boost, Disc IS (6-bolt).

    Asse mozzo posteriore

    Asse mozzo posteriore

    DT Swiss 370, 12x148mm Boost, Disc IS (6-bolt), Sram XD Steel (SSRAM) freehub body, Ratchet LN 18 freehub system.

  • Pneumatico anteriore

    Pneumatico anteriore

    Maxxis Assegai 29x2.5WT, tubeless ready, 3C Maxx Grip compound, EXO+ protection, 60TPI, folding bead

    Pneumatico posteriore

    Pneumatico posteriore

    Maxxis Minion DHR II 27.5x2.5 WT, tubeless ready, 3C MaxxTerra compound, DD protection, 120x2TPI, folding bead

  • Pedivelle

    Pedivelle

    e*thirteen Helix Core e*spec alloy. All sizes: 155mm

    Guarnitura

    Guarnitura

    Sram XX Eagle 36T T-Type, 104BCD, steel, CL55

  • Pedali

    Pedali

    N/A

    Catena

    Catena

    Sram GX Eagle T-Type, 12s, w/Powerlock

  • Deragliatore

    Deragliatore

    N/A

    Cambio - Posteriore

    Cambio - Posteriore

    Sram S1000 Eagle AXS, T-Type, 12s

  • Comandi cambio

    Comandi cambio

    Sram Eagle AXS Pod Controller w/discrete clamp, 12s

    Cassetta Pignoni

    Cassetta Pignoni

    Sram XS 1270, 10-52T, T-Type, 12s

  • Forcellino

    Forcellino

    Not included - UDH compatible

    Peso senza pedali

    Peso senza pedali

    22.8 Kg

  • Display

    Display

    Avinox DP100 Display / Avinox BC100 Wireless Controller (L&R)

    Motore

    Motore

    Avinox Drive Unit

  • Batteria

    Batteria

    Avinox 800Wh Battery / Avinox 4A Charger

Leggi di più Leggi di meno

ZENDIT XR
ZENDIT XR
ZENDIT XR
Mullet
170mm
165mm
Avinox
800 Wh
Carbon
ZENDIT XR

ENDURO

$15,499
ZENDIT RR S
ZENDIT RR S
ZENDIT RR S
Mullet
170mm
165mm
Avinox
800 Wh
Carbon
ZENDIT RR S

ENDURO

$12,999
ZENDIT RR
ZENDIT RR
ZENDIT RR
Mullet
170mm
165mm
Avinox
800 Wh
Carbon
ZENDIT RR

ENDURO

$10,699

Limited allocation. High demand.

Reserve yours now:

Trova il tuo negozio

Trova il negozio più vicino

Go to top of page